Price:

$225.60 $117.80

Reviews:



China
Clear
SKU: 32992946692 Category:







◆Main Display

1,WiFi indicator- Displayed when connected to a WiFi Network

2,Hold:Temperature Hold.

3,Adjusting the optional settings.

4,Day Indicator&Clock

5,Away:Means the MC6-HW is maintaining a lower temperature to give frost protection.

6,OPT(Optimum):Displayyed ON/OFF of the “Optimum Start”

7,Air Humidity:

1)If humidity value less than 30%,the pointer will be in the Red area.

2)If humidity value is between 30% and 60%,the pointer will be in the Green area.

3)If humidity value is more than 60%,the pointer will be in the Gray area.

8,Power ON/OFF

9,Holiday:Displayed when thermostat is in holiday mode.

10,Schedule:Programmable Operation.

11,Setup Button

12,13 Adjusting the Setting Temperature or Turn Page.

14,Setting Temperature display

15,Room Temperature display

16,℃ or ℉ Display

17,Displayed “ Heating” symbol

◆Fearture Settings

Clock Setting To set the clock,follow these steps. ★Click the iconand enter Feature Settings. ★Click The “Clock Setting”enter Setting Interface ★Click the column of Year/Month/Day,use the icon /to set the Year/Month/Day values. ★Click the column of “Time”,use the icon / to set Hours/ Minute. ★Click the iconto save and return to main display. Backlight Setting ★Click the iconand enter Feature Settings. ★Click“Backlight”Seclection and enter Backlight Setting. ★Ambient Light Dimming is in Mode:Automatically adjust the backlight brightness. ★Ambient Light Dimming is in Mode:Manually adjust the backlight brightness. ★Use the icon / to adjust to the desired brightness ★Click the iconto save and return to main display. Standby Screen ★Click the iconand enter Feature Settings. ★Click “Standby Screen”and enter Setting interface. ★There are Four Selection(3Min,10Min,Just Night,Never) to controls the Standby Screen Time. ★For example, setting the standby time is for 10 minutes Click the iconin the front of “10 Min” and it will turn to . ★Click the icon to save and return to main display. Screen Lock ★Touch (Click on )the iconand enter Feature Settings. ★Click “Screen Lock”and enter setting interface. Lock Pin Options ★For example, Setting the Lock Pin is 5209 ※Click the First Column ,use the icon / to set to 5 ※Click the Second Column , use the icon / to set to 2 ※Click the Third Column ,use the icon / to set to 0 ※Click the Fouth Column ,use the / to set to 9 ★Click the iconto save and return to main display. Note:To unlock the MC6 press .The display will show and you will need to enter the four digit pin number you set previously. Temperature Format ★Click the iconand enter Feature Settings. ★Find the “Temp Format” option,click it and enter setting interface. ★There are two Options/ ★Click the iconin the front ofor ,and it will turn to . ★Click the icon twice to save and return to main display. Temperature Limit ★Click the iconand enter Feature Settings. ★Find the “Temp Limit ” option,click it and enter setting interface. ★Click the First Column,use the icon / o adjust Minimum Temperature to 5-34℃ ★Click the Second Column ,use the icon /to adjust Maximum Temperature to 6-35℃ ★Click the icontwice to save and return to main display. Schedule ★Click the iconand enter Feature Settings. ★Find the”Schedule “option,click it and enter setting interface. There are four Options: Weekday/Weekend,7Days,24Hours,None ★For example,Setting the program Mode to 7Days. ※Click the iconin the front of 7 Days,and it will turn to ※Click the iconto save and return to main display. ※Click the “Schedule”on the Main Display,and enter“Edit”interface. ※On the Edit Page,From Monday to Sunday can be selected to edit. ※Click “Monday”and enter Monday’s setting interface. ※There are Four Time Period can be selected: Morning/Day/Evening/Night ( Each Time Period hasOptions) In the program of Monday: ※Morning: Click the First Column of “Time” ,use the icon / to set desired “Hour”Click the Second Column of “Time” ,use the icon / to set desired Minute. For Example:The Setting Time is 04 (Hour):00 (Minute) Click the Third Column of “Temperature”,use the icon / to set desired Temperature. For Example:The Setting Temperature is 27℃ ※Day The same as Program Morning procedures. For Example:The Setting Time is 10 (Hour):40 (Minute) For Example:The Setting Temperature is 24℃ ※Evening The same as Program Morning procedures. For Example:The Setting Time is 20 (Hour):30 (Minute) For Example:The Setting Temperature is 26℃ ※Night The same as Program Morning procedures. For Example:The Setting Time is 24 (Hour):00 (Minute) For Example:The Setting Temperature is 28℃ Four Time Period: 04:00-10:40: During this time period ,the temperature willremain at 27℃ 10:40-20:30:During this time period ,the temperature will remain at 24℃ 20:30-24:00:During this time period ,the temperature will remain at 26℃ 24:00-04:00:During this time period ,the temperature will remain at 28℃ Switch Diff ★Click the iconand enter Feature Settings. ★Find the “Switch Diff ” option,Click it and entry in setting interface. ★There are four Options:0.5/1/2/3 ★Click the iconin the front of “0.5/1/2/3” and it will turn to . ★Click the icontwice to save and return to main display. Output Delay ★Click the iconand enter Feature Settings. ★Click “Output Delay”and enter setting interface. ★Use the icon / to adjust the Minutes(0-15) ★Click the icontwice to save and return to main display. Defrost The thermostat automatically enter the Defrost Mode when the room temperature is drop below the defrost temperature. ★Click the iconand enter Feature Settings. ★Find the“Defrost” option,Click it and enter setting interface. Temperature Options. ★Use the icon / to adjust the temperature. ★Click the icontwice to save and return to main display. Sensor Selection There are five options: Built in Sensor(Default) Remote Air Sensor Floor Sensor Only Built in &Floor Sensor Remote Air &Floor Sensor ★Click the icon and enter Feature Settings. ★Find the “Sensor Selection” option,Click it and entry in setting interface. ★Click the iconof which sensor you required. ★Click the icontwice to save and return to main display. Floor Temperature Limit ★Click the iconand enter Feature Settings. ★Find the “Floor Temp Limit” option,Click it and entry in setting interface. ★Use the icon / keys to set the temperature. ★Click the icontwice to save and return to main display. ★Click the icon and enter Feature Settings. ★Find the “Optimum Start” option,Click it and enter setting interface. Options. ★Click the icontwice to return to main display Daylight Saving Time ★Click the iconand enter Feature Settings. ★Click “DST”and enter setting interface. Auto DST Options ★There are three options: European Union/US&Canada/Australia&New Zealand ★Click the iconin the front of “EU/U&C/A&Z” and it will turn to . ★Click theKeys to save and return to main display System Information ★Click the iconand enter Feature Settings. ★Click “System Information”and enter interface,and it shows Version Number:2.0 ★Click theKeys to Exit Reset To Factory Settings ★Click the iconand enter Feature Settings. ★Click “ ”and enter setting interface. ★Click “Reset” to factory settings ★Click theKeys to Exit. Warning:Reset will make you lost the current Settings and return to the factory Settings. Installation Install the thermostat at the visual level. Please read the instructions in order to better understand our products. Do not install in areas close to the heat source, which will affect its function. This MC6 thermostat is designed to be flush mounted and requires a 35mm power box in the wall. Step 1 Using a flat-blade screwdriver, loosen the screws from the bottom face of the front of the thermostat, and then separate the front half from the backplate. Step 2 First place the front panel of the thermostat in a safe place. And then follow the wiring diagram on page *** of manual for connecting terminals. Step 3 Screw the thermostat backplate into the mounting box in the wall. Step 4 The thermostat front panel in the thermostat backplane fastening, and then lock the screws. Fasten the front of the thermostat onto the backplate,securing it in place with the retaining screw. ◆Technical Specification Power supply :110-230VAC,50/60 Hz Setting temp range:5-35℃ Working temp range: -10-45℃ Temp accuracy:±1℃ Power consumption:1W Floor Temperature Limit:20-45℃ Max Switch Current:3A/5A(Optional) LCD screen size:3.5 Inch Touch:Capacitive touch Dimention: 96 * 86 * 42.5 (W*H*D) mm Wifi:802.11 b/g/n (2.4G)

Weight0.3 kg
Dimensions10 × 9 × 3 cm
Certification

RoHS,EMC,UL,CE

Cooling/Heating

Cooling/Heating

Power Source

Electrical

Type

Central Air Conditioners

Technique

Variable Frequency

Car refrigerator Type

Heating

Indoor Machine Noise

<23dB

Feature

Save Energy

EER

3.4

Grade

Grade 1

Voltage (V)

230V

Power Type

AC

Power (W)

5w

Circulating Air (m3/h)

620

Use

Room

Brand Name

TINTON LIFE

Is Electric Heating

Yes

Model Number

MC-6

Air conditioning power

>1.5HP

Condition

New

Time to market

Jun-15

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.































Do NOT follow this link or you will be banned from the site!