USD 11.61/pieceUSD 4.51/pieceUSD 4.19/pieceUSD 9.03/pieceUSD 9.03/piece
Rated voltage: 11.1V-12.6V
Nominal capacity: 4400mAh
Standard discharge current: 0.2C
Maximum discharge current: 1C
Products: ≤ 250m ohm internal resistance
The battery pack built-in battery protection board of PCB!
Applicable scope: all kinds of power model, electric tools, electric toys…
The advantage of using lithium battery:
1 small volume, light weight, large capacity, environmental protection, no memory effect.
The 2 is the power of the portable electronic device of choice, but more delicate use of lithium battery, please pay attention to the following points.
Use common sense:
1 must be charged using a standard lithium battery charger 4.2V.
2 prohibits the large current discharge.
3 prohibits the discharge, the single battery voltage shall not be less than 2.5V.
4 prohibited dismantling, short-circuit the battery, most likely caused by short circuit.
The battery has 2 sizes, please choose the suitable size when buying. Thank you very much! Please note size according to your demand, such as no note size, random delivery.
With protection circuit: have overcharge, over discharge, over current, short circuit protection functions
the battery requirements
1: need li-ion battery chargers for; Constant current constant voltage;
2: the charging voltage: 12.6V
3: charging current: 1A
4: supporting the charger is charging when the red light is full of green light
battery discharge Requirements
1: input: 5.5 * 2.1 plug wire
2: output: 22# thread that is 150 mm long
3: the maximum instantaneous current: 5A
4: maximum working current: 3A
5: output input if there is any other requirement can be contact with the owner, the above parameters for the default delivery
Have the shipping list
1:12 v-4.4Ah lithium-ion batteries 1PCS.+12.6V 1A Charger *1PCS